
Setup & Culture βΊ Your First Session
Preview before you play β the DJ superpower.
Headphones in DJing don't replace the speakers β they let you listen to the *next* track privately while the *current* track plays loud in the room. That's how you beatmatch and find the right place to start the new track before anyone in the room hears it.
Every DJ mixer has a 'Cue' button on each channel. Press it and that channel goes to your headphones (only). You can cue multiple channels at once to hear them blended privately.
There's also a 'Cue/Master' or 'Mix' knob on the headphone section. All the way left = only the cued track. All the way right = only the room mix. In the middle = blend of both, which is how most pros monitor live.
Think of it like β
Think of headphones as a chef tasting the next dish in the kitchen before it leaves for the dining room.
βΈ Why this matters
Signal flow β watch the dot
Plug headphones into the front of the mixer (1/4" TRS jack).
π§ Silence β even if music is playing in the room. Nothing reaches the cue bus until you press a Cue button.
Press Cue on channel 1 (with a track loaded and playing).
π§ You hear that channel in your phones. Press it again to release.
Set the Cue/Master mix knob fully to 'Cue' and slowly turn it toward 'Master'.
π§ You hear the room mix bleed in. Park it at noon for a balanced monitor.
Cue both channel 1 and channel 2 with both decks playing.
π§ You hear both decks privately blended. This is how you check beatmatch before opening the channel fader to the room.
Open the channel fader on the cued deck while the cue is still active.
π§ Sound enters the room. Drop the Cue button β your phones now only carry the other deck (the next track), as it should be.
Test your knowledge
Based on Headphone Monitoring and Cueing. Use what you just read β not general knowledge.