
Setup & Culture βΊ Gear & History
Decks, mixer, headphones β what they all do.
Every DJ setup is the same shape: two (or four) decks that play music, a mixer that blends them, a speaker output for the room, and a headphone output just for you.
The decks can be turntables, CDJs (Pioneer's CD/USB players), a DJ controller plugged into a laptop, or even just software with a keyboard. They all do the same job: play a track and let you start/stop/loop/cue it.
The mixer is the brain. Each deck plugs into a channel with its own volume, EQ (bass/mid/treble), and a button to it to your headphones. The between channels lets you fade AβB with one slider.
Think of it like β
A DJ setup is a kitchen with two stove burners (decks), a counter where you combine ingredients (mixer), a plate you serve from (master out) and a tasting spoon (headphones).
βΈ Why this matters
Signal flow β watch the dot
Trace the signal path on any DJ setup before you start: USB/deck β channel input β master out β speaker.
π§ If no sound, walk the path one stage at a time β the silence is always at one specific point in the chain.
Plug headphones into the mixer (not the laptop or controller).
π§ Only the channel(s) with the Cue button lit will play in your phones β that's by design.
Lower the master fader, then raise channel 1's gain until peaks reach -6 dB on the channel meter.
π§ This is β set channels first, then use the master fader for room volume.
Switch the crossfader fully left, then fully right.
π§ Only the deck on that side plays. Centre = both. This is the most-broken control on rented gear, so check it.
Find the booth output knob (separate from master) and the headphone mix knob (cue/master blend).
π§ Booth = your stage monitor. Cue mix = how much of the room you hear in your phones vs. the cued track.
Test your knowledge
Based on DJ Equipment. Use what you just read β not general knowledge.